素材大全-竖向柱状图.ppt

Quick Presentation Toolkit ? Accenture 2004. All Rights Reserved. ? Accenture 2001 Vertical Column Charts Quick Presentation Toolkit Version 4.0 Hints for drawing charts Waterfall chart 1 Waterfall chart 2 Waterfall chart 3 Waterfall chart 4 Waterfall chart 5 Waterfall chart 6 Deviation column chart Range column chart Grouped column chart 1 Grouped column chart 2 Sub-divided column chart Sub-divided 100% column chart Step-column chart Combination column-line chart 1 Combination column-line chart 2 * * Editing charts Double-click on a chart to edit it If the data table does not appear click on the table icon Adding graphic elements or text to a chart There are two ways to add graphical elements: Double-click on the chart to work in the chart module, click on the draw icon in the top menu bar and start drawing Draw or write the text in PowerPoint an place it over the chart module Be careful if you are using the chart module to draw. Occasionally all graphic elements move a bit if you leave the module Resizing Before you resize the chart, make sure that you double-clicked on it and a wider gray line surrounds the chart, otherwise all letters and graphic elements will bend if you resize the chart Take care that the text is still readable after resizing Discontinuous axis marks To create a discontinuous axis in a chart, copy one of the marks on the right and place it over the chart axis(in PowerPoint, not in the Chart Module) Both marks consist of several grouped elements therefore take care that those elements are still grouped before you resize them Hints: 1 Calculate and enter the value corresponding to the area below the column in the row marked Space 2 Enter the height of the column in the row marked Column row 3 Add/remove columns and rows as required 4 Add series lines between the columns manually, if required 5 To change the height of the columns select Chart Options and turn on the y-axis, then use Format Axis/Scale to set the length of the y-axis (check th