WOODWARD 2301A 调速器速度控制器说明书.pdf

Woodward 2301A Speed Controls FEATURES Idle and rated speed settings Idle to rated speed linear ramp Automatic start-fuel limiting Failed speed-sensor detector EU Directive compliant APPLICATION DESCRIPTION The 2301A Speed Control controls the speed or The 2301A Speed Control is housed in a sheet- load of diesel engines. metal chassis and consists of a single printed circuit board. All control-adjustment The unit provides control in the isochronous potentiometers are accessible from the front of mode, with droop available through an the chassis. externally wired potentiometer. The isochronous mode is used for constant speed of the Speed range is set by an internal dip switch controlled prime mover, as long as it is able to inside the aluminum cover of the control. provide power to satisfy the load. Speeds are based on the frequency of a sensed gear, not necessarily engine rpm. The 2301A Speed Control is compatible with Woodward SPM-A synchronizers, load sensors, Speed Trim and other power generation controls. These Speed trim potentiometer or digital reference controls can be added to the system at any unit may be connected to the control to adjust time, using the auxi