基于集成建模方法的乙二醇全流程模拟研究.pdfVIP

2008 年中国过程系统工程年会会议论文集 基于集成建模方法的乙二醇全流程模拟 1 2 1 1 1,3 罗娜 ，蒋勇 ，叶贞成 ，杜文莉 ，钱锋 （1. 华东理工大学自动化研究所，上海，200237 ；2. 中国石化扬子石油化工有限公司，南京，210048 ；3. 华东理工大 学化学工程联合国家重点实验室，上海，200237 ） 摘要：乙二醇生产流程是一个包含十几个精馏塔和固定床催化反应器的长流程。由于流程长且反应催化剂影响不易确定 等因素，乙二醇生产过程的全流程模拟十分困难。本文借助ASPENPLUS软件平台，集成支持向量机、优化算法、机理 建模等多种方法，建立了乙二醇的全流程模型。通过采集并处理实际生产的工业数据，采用优化算法进行模型的智能校 正，进一步完善了模型的性能。乙二醇全流程模型模拟结果与实际工业过程数据相符，能够满足工业建模的要求。 关键词：支持向量机；环氧乙烷；催化剂失活；建模方法；全流程模拟 中图分类号：TQ 018 文献标识码：A Simulation of Ethylene Glycol Process Based on Integrated Modeling Method 1 2 1 1 1,3 Na Luo , Yong Jiang , Zhencheng Ye , Wenli Du , Feng Qian (1. Automation Department, East China University of Science and Technology, Shanghai, 200237, China, Email:naluo@ecust.edu.cn; 2. Sinopec YangZi Petrochemical Company, Nanjing, 210049; 3. State-Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai, 200237, China) Abstract: Ethylene glycol process is a long process which includes more than ten fractionating column and fixed-bed catalyzing reactor. In the long process, there are many uncertain factors such as catalyzer’s influence and so on. Therefore the simulation of the whole ethylene glycol process is very difficult. In this paper, ASPEN PLUS software is used as a platform. Support vector machine, optimization method, mechanism modeling methods are integrated to develop the model of ethylene glycol process. With data from process, the process model was intelligently rectified. The results of model simulation agree with actual data fairly and the whole process model can satisfy needs of product process. Key Words: Support Vector machine, ethylene ox