建筑承包商健康和安全资料 Construction Contractors Health Safety Pack 非洲矿业有限公司AML HSE安全管理制度 英文版.docVIP

Form: SWI-F0402B Revision: Rev 0 Construction Contractors Health Safety Pack Table Of Contents: Preamble 1.0 Introduction 2.0 Safety Policy 3.0 Roles and Responsibilities 4.0 Document Control 5.0 Hazard Identification Risk Assessment 6.0 Job Safety Analysis 7.0 Skills and Competencies 8.0 OHS Induction 9.0 Workers Compensation Rehabilitation 10.0 Electrical 11.0 Hazardous Substances 12.0 Lifting Gear 13.0 Plant 14.0 Personal Protective Equipment (PPE) 15.0 Fire Protection 16.0 Tool Box Talks 17.0 First Aid 18.0 Incident/Accident Reporting 19.0 Alcohol Other Drugs Working At Heights 21.0 Emergency Response 22.0 HSE Forms Preamble The Contractor Health Safety Pack has been developed to help formulate a standardized approach to safety management in the construction industry. The Contractor Health Safety Pack, or its equivalent, is the minimum health and safety requirement for Contractors who engage in work with African Minerals Limited The contents of the Pack may not apply to each and every contract trade. The Pack is designed to assist a company which has no safety management system by providing a ‘standardised’ approach to help develop such a system. The Pack is not designed to replace the existing safety management system of a company. Where such a system exceeds the requirements of the Contractor Health Safety Pack then the forms and other documentation provided by such a system will be accepted provided they exceed Health, Safety and Rehabilitation requirements outlined in this Pack. The Company signing this document shall be known throughout the document as ‘the Company’ except where the Company’s name is to be entered. Introduction This document sets out the safety management strategy to be adopted by ………………………… Insert Company name during the course of the………………………… contract on the………………………………… Insert trade Insert site name project managed by …………………………………………………….. Insert Principal Contractor