以柔克刚-提高耐火材料抗热震性.pptVIP

以柔克刚— 提高耐火材料抗热震性 Just to touch the huge and complicated topic Not to answer/solve questions But to raise questions/suggestions The ideas are not necessarily new. The ideas were proposed before by other people in a way or another, or even in practice 题外话 – 研究题目 我们高温所研究生的研究题目：“加入Al粉对MgO-C砖结构和性能的影响” 结果：AP, BD, CCS, MOR, HMOR，PLC, TRS, SCR, XRD, SEM 结论：把对Al粉对以上性能、相组成、显微结构的影响进行总结 以上题目和结论有没有问题？ 题外话 – 研究题目 【药品名称】 品名：维C银翘片 【功能主治】用于流行性感冒引起的发热、头痛、咳嗽、口干、咽喉疼痛。 【不良反应】尚无报道。 “加入Al粉对MgO-C砖结构和性能影响” 主要目标：对什么具体性能的影响？ 结论提及：对其他性能有没有负面影响？ Hasselman’s thermal shock theory According to Hasselman’s thermal shock theory, the driving force for crack propagation is proportional to the stored elastic energy in the body at onset of fracture. Thermal stress dependence on modulus of elasticity Thermal stress ? = E·? = E·?·?T TEC ? ：dependent on the material ?T：determined by the application conditions In order to reduce ? ，E has to be reduced E is determined by microstructure（microcracks, phase distribution, et al） Microstructure is generated by processing 以柔克刚 – 微裂纹 Softening through microcracks Refractories selection for steel ladles Marco Antonio Quintela, Fabio Duarte Santos, Celso Anizio Pessoa, Jose Anchieta De Rodrigues, Victor Carlos Pandolfelli, UNITECR 05 - Proceedings of the Unified International Technical Conference on Refractories, p 380-384 MgO-C ladle brick HMOR of the MgO–C refractory bricks Carbon loss and oxidation index at 1400?C after 30 minute in air. Thermal shock resistance of the MgO–C bricks Slag corrosion resistance Results of industrial performance Considering the traditional evaluation method for materials, based on mechanical strength, oxidation and corrosion, which one would be the best material for slag line of steel ladle? The best one should not be MC2, because its corrosion resistance are similar to the other three and its HMOR is remarkably lower than MC1 and MC3. Results of industrial performance But MC2 presented superior industrial performance! Results o