9cj3.0散草捡拾运输车切刀及喂入机构的研究分析 word格式.docxVIP

Key words:Cutter;Scattered grass pickup truck;The feeding mechanism; The finite element analysis;Motion simulationDirected by: Prof. Ta NaApplicant for Doctor degree: Li Yang（Mechanical Engineering)(College of Mechanical and Electrical Engineering. Inner Mongolia Agricultural University. Hohhot 010018. China)目录1引言 ................................................................ 11.1课题研究背景 .................................................... 11.2散草捡拾运输车国内外研究状况 .................................... 11.2.1 散草捡拾运输车国外研究现状 ..................................... 11.2.2 散草捡拾运输车国内研究现状 ..................................... 11.3研究的目的和意义 ................................................ 21.4存在问题 ........................................................ 31.5研究内容 ........................................................ 32切刀及喂入机构相关分析的理论知识 .................................... 62.1有限元分析 ...................................................... 62.2喂入机构的运动仿真分析 .......................................... 82.2.1虚拟样机技术简介 .............................................. 82.2.2农业机械中应用虚拟样机技术现状 ............................... 103切刀分析有限元分析 ................................................. 113.1弹簧的分析 ..................................................... 113.2切刀受力分析 ................................................... 174喂入机构 ........................................................... 214.1速度基点法 ..................................................... 214.2喂入拨叉运动仿真 ............................................... 235结论与展望 ......................................................... 335.1研究分析结论 ................................................... 335.2展望 ........................................................... 33致谢 .............................................................. 35 参考文献 ........................................ 错误!未定义书签。作者简介 ........................................................ 37插图和附表清单1.图 19CJ—3.0 捡拾运输车总机示意图42.图 2散草切刀 ........................................................... 53.图 3捡拾运输车喂入装