齿轮泵盖铣削加工工艺及程序编制（数控机床）.doc

摘 要 此次在毕业设计中进行数控加工中心的编程与操作,是在学完了数控机床及其应用和相关的大部分专业课,在计算机上进行模拟与仿真.在生产实习的基础上进行学习的一个重要教学环节. 通过本题设计,提到数控加工中心的原理.零件编程所用的指令,并解释,加工的零件各部分尺寸精度和表面质量均达到零件的要求. 在数控加工工艺设计中包括(零件图的工艺分析,毛坯的选择，工序划分,切削用量,走刀路线等).通过设计,我对数控加工中心的整个加工过程有了较全面的理解,经过在设计中选择刀具,我对数控铣床系统的特点与指令,刀具材料和使用的范围有了较深的理解,基本掌握了机床刀具的选用方法. 经过编制零件的，基本熟悉了数控编程的主要内容及步骤,编程的种类,程序的结构与格式.另外还学会了在计算机上进行模拟，虽然课程设计比较复杂,但在设计过程中不断学习,在工艺方案确定后,加工程序也经过多次修改.最终完成了零件的加工 由于能力有限,经验不足,数控技术发展迅速,设计中还有许多不足之处,希望各位老师多加指教,提出宝贵的意见. 关键词：数控加工中心，编程，工序划分，加工程序，尺寸精度，数控技术发展。 Abstract This time carries on the numerical control processing center in the graduation project the programming AND-OPERATION, was in study the numerical control engine bed and its the application and the correlation majority of professional courses, carried on the simulation and the simulation on the computer Carries on the study in the production practice foundation an important teaching link. Designs through the main subject, mentions the numerical control processing center the principle The components programming uses the instruction, and the explanation, the processing components each part of sizes precision and the surface quality achieves the components the request. In numerical control processing technological design including (detaildrawing craft analysis, working procedure division, cutting specifications, route and so on) Through the design, I had amore comprehensive understanding to the numerical control processing center entire processing process, passes through chooses the cut ting tool in the design, I to the numerical control milling machine system characteristic and the instruction, the cutting tool material and the use scope had a deeper understanding, basically grasped the engine bed cut tool to select the method. After the establishment components processing procedure, has basically been familiar with the numerical control programming main content and the step, the programming type, the procedure structure and the form Moreover also learned to