摄像模组和图像品质的分析及运用-analysis and application of camera module and image quality.docxVIP

目录第一章绪论...........................................................................................................1第二章CMOS摄像模组的研究22.1手机摄像模组的组成..............................................................................22.2笔记本摄像模组的组成..........................................................................42.3摄像模组的功能特性..............................................................................6第三章CMOS摄像模组的设计73.1NoteBookCMOS摄像模组工作原理73.2定焦模组与变焦模组..............................................................................73.3光学变焦与数码变焦..............................................................................83.4摄像模组的调焦......................................................................................93.5模组固件框架及UVC接口123.6设计笔记本摄像模组............................................................................14第四章研究摄像模组品质.................................................................................164.1CMOS模组整体检测流程164.2检测项目及原理....................................................................................16Resolution解析度16ColorCorrect颜色准确性19SNR信噪比23RI相对照度244.2.5CS白平衡色差25DeadPixel（坏点）27Particle（Dust）27DR动态范围30第五章检测系统的硬体架构及实现.................................................................315.1搭建调焦及图像检测环境....................................................................315.2设计影像测试综合图............................................................................345.3自动控制系统的设计............................................................................36第六章检测系统的软体结构及实现.................................................................386.1检测软件整体结构................................................................................38关键技术-图像引擎DirectShow40关键技术-OpenCV处理Particle41关键技术-使用Labview读取DataMatrix二维条码446.5关键技术-自动定位的设计..................................................................466.6关键技术-多摄像模组的配置..............................................................47第七章试验结果与分析.....................................................................................507.1试验流程.