SPC技术在烧结钕铁硼质量管理中的应用研究-工业工程专业论文.docxVIP

Ab Abstract III III other measures was taken to improve process,the improved process capability index is calculated to be significantly improved,satisfying the requirements of product quality in production;At the same time,the control chart was analyed for impurity rate,the process fluctuation was found， through the reason analysis,found out the cause abnormal impurity rate on the high side of the main factors,the problems are analyzed and improved,the process output products impurity rate was reduced after the equipment improvement,and played a good effect. Finally, the implementation of the SPC application specification was formulated by combing with the SPC principle and S-NdFeB production enterprises,which would be guiding and promoting the implementation of SPC with the objective and scope,suitable time,work content， process specifications and instructions. Keywords: SPC technology; S-NdFeB; The quality control 江西 江西理工大学硕士学位论文 目录 目 录 摘 要 I Abstract II HYPERLINK \l _bookmark0 第一章 绪 论 1 HYPERLINK \l _bookmark1 1.1 研究背景及依据1 HYPERLINK \l _bookmark2 1.2 研究意义1 HYPERLINK \l _bookmark3 1.3 国内外研究现状 2 HYPERLINK \l _bookmark4 1.4 主要研究内容 3 HYPERLINK \l _bookmark5 第二章 S-NdFeB 磁钢及工艺流程介绍 4 HYPERLINK \l _bookmark6 2.1 S-NdFeB 磁钢概述 4 HYPERLINK \l _bookmark7 2.2 S-NdFeB 磁钢的主要应用 6 HYPERLINK \l _bookmark8 2.3 S-NdFeB 磁钢生产工艺流程介绍 7 HYPERLINK \l _bookmark9 2.4 本章小结 10 HYPERLINK \l _bookmark10 第三章 SPC 基本原理及应用规范 11 HYPERLINK \l _bookmark11 3.1 SPC 基本理论概述 11 HYPERLINK \l _bookmark12 3.2 过程能力分析 12 HYPERLINK \l _bookmark13 3.3 控制图 14 HYPERLINK \l _bookmark14 3.3.1 控制图理论 14 HYPERLINK \l _bookmark15 3.3.2 传统 x ??R 控制图 15 HYPERLINK \l _bookmark16 3.3.4 控制图的改进优化 17 HYPERLINK \l _bookmark17 3.4 SPC 的应用规范 18 HYPERLINK \l _bookmark18 3.4.1 SPC 应用的关键要素 18 HYPERLINK \l _bookmark19 3.4.2 SPC 应用的基本步骤 19 HYPERLINK \l _bookmark20 3.4.3 S-NdFeB 生产企业 SPC 应用规范 20 HYPERLINK \l _bookmark21 3.5 本章小结 27 HYPERLINK \l _bookmark22 第四章 SPC 控制方法应用 29 HYPERLINK \l _bookmark23 4.1 数据采集与验证