TRT叶片表面积灰对其力学性能的影响研究-机械制造及其自动化专业论文.docxVIP

西安理工大学硕士学位论文 西安理工大学硕士学位论文 A Abstract PAGE PAGE IV Title: THE INFLUENCE ANALYSIS OF THE DEPOSITION ON TRT BLADE TO ITS MECHANICS PROPERTIES Major: Mechanical Manufacture and Automation Graduate: Rui Li Signature: 2例， 2-i Supervisor: Associate prof. Dexin LI Signature: Dε泛队人J; Abstract Blast Furnace Top Gas Recovery Turbine Unit (ie. TRT) is a mechanical device which uses the heat energy and pressure of the blast furnace gas to generate electricity. The blades 缸e the core components for the energy conversion of the TRT device，the fouling attached to whose surface can affect the mechanical properties of the blades. The mechanica l properties of the fouling blades 缸e analyzed and studied in this paper. According to the information provided by the enterpri se，the position of the fouling on the blade can be divided into two cases，the mechanical properties analysis under different fouling thickness of the blades is carried out. The not fouling blade and fouling blade geometry model are established respectively ，and the corresponding finite element analysis models are built according to the installation characteristics and the actual working conditions of the blades. The static prope此ies of different fouling blades under the same constraints，the same load is calculated，which is compared to the static properties of the no-fouling blades，the inf1uence laws of the fouling for the static properties of the blades 町e obtained. The model analysis of the no-fouling blades and the fouling blades is worked out，the first 企equency band s of the static and dynamic frequency is calculated separately，the relationship curve of the natural 仕equency for the blades changing with the fouling thickness is got，and the blades prone to resonance in which case of fouling is determined. The transient analysis are carried out according to the blades are exposed to unsteady f10w forces loading dynamic load under actual working conditions. The changing laws of the blade d严1创nic stress