在测试仪跳线中的回波损耗—靠近接收发送器-唯康通信.ppt

创纪录的光缆认证测试速度 按下 DTX自动测试键 … 认证两条光缆（发送/接收） 在两个波长上测试（标准要求） 长度测量 12秒钟内完成5次测量 比其他仪器快5倍 DTX系列测试仪极大地缩短了认证测试的总体时间 快速先进的故障诊断 DTX 精确定位故障 – 唯一能提供修改建议的测试仪 创纪录速度的Fiber 认证测试 5X Faster!使用DTX光缆测试适配器12秒钟内认证一对光缆。快5倍！ 集成了 VFL 在光缆和双绞线之间进行测试或诊断切换只需按一次按键 感谢您的参与 * 要做到这点，福禄克网络是本着不断听取用户的需求的声音，了解用户的工作，能力和工作模式。 福禄克网络根据网络管理部门里每一个工作人员的需求，开发专门对配合他们工作需要的测试工具。 我们不变的使命是不断为用户提供创新的，让他们喜悦的，符合网络超级透视这个承诺的方案。 * ISO/IEC 11801:2002 International standard for generic cabling. Often quoted by manufacturers offering 15 year warranties to Class F - 600MHz. Cable testing is only defined to Class E 250 MHz/ EN50173 :2002 Considered as the European version of ISO/IEC 11801. It Includes issues specific to Europe such as safety and EMC. ANSI/TIA/EIA 568-B Series The series comes in three parts: ANSI/TIA/EIA 568-B.1 -Commercial Building Telecommunications Cabling Standard ANSI/TIA/EIA 568-B.2 - 100 Ohm Twisted Pair Cabling Standard ANSI/TIA/EIA 568-B.3 - Optical Fiber Standards These standards incorporate and refine the technical content of: TIA/EIA TSB67 TIA/EIA TSB72 TIA/EIA TSB75 ANSI/TIA/EIA-568-A-1 - Delay Delay Skew ANSI/TIA/EIA-568-A-2 - Misc. changes ANSI/TIA/EIA-568-A-3 - Hybrid and Bundled Cables ANSI/TIA/EIA-568-A-4 - Patch Cords ANSI/TIA/EIA-568-A-5 - Category 5e TIA/EIA/IS-729 – Technical Specifications for 100 Ohm Screened Twisted-Pair Cabling These are the addendums added since the original publication of the now obsolete ANSI/TIA/EIA 568-A in 1995. * In order to understand which test parameters should be tested or the reason for a certain selection of parameters we can revisit the model that was underlying the performance specifications for Cat 5. In all of the older network applications -- we can now call them legacy systems -- the underlying transmission model made the assumption that all wire pairs were to be used in one direction (half duplex). Typically only two wire pairs were needed to establish a connection. The graphic in this slides shows that each