动物实验用脊髓硬膜外电刺激系统的设计-检测技术与自动化装置专业论文.docxVIP

Abstract Epidural spinal cord stimulation is a method that a group of stimulating electrode is implanted by surgery, and then electrical stimulation pulse will be transferred directly to the spinal cord to stimulate the central nervous organizations creating a electric field to generate abnormal sensory region on the spinal pathways,in order to blocking the transmission of pain signals , achieveing the purpose of ease pain and treating diseases through stimulate Spinal cord by the pulse current . In this thesis, we firstly propose the solution of the epidural spinal cord stimulation system on the basis of consulting in the vast literature and investigating in the status and development trend of implantable spinal cord stimulation implantable devices at home and abroad. Secondly, accoding to the miniaturization and low power requirements of implanted epidural spinal cord stimulation system, we research the control of signal circuit, design a communication circuit which is based on the Zigbee, and finish the communication circuit hardware and software research. Because stimulation equipment is the core of the system ,and it will ultimately be implanted into the body of the animals by surgery, so the size of the device, power consumption and reliability are the basic requirements and design difficulty. Therefore we adopt the industrys lowest-power MSP430 F1611 micro controller core as a control system, while CC2420 is used as a wireless transceiver modules, the use of the software programming structure is optimized, in order to minimizing the power consumption and volume of the stimulation system. Considering the actual operation of equipment in animal experiments, the design of remote part of the simulation system has a detailed operation of the LCD menu, so that users can operate the equipment easily to change parameters of stimulation. Finally, the entire circuit system is integrated to make sure the stability of the control circuit. we design and debug the softwar