Static-and-Dynamic-Stress-Analysis(静态和动态应力分析).doc

红领巾√友情提供！ Chapter 5 Static and Dynamic Stress Analysis 第五章 静态和动态应力分析 5-1. Stress Analysis 5-1.应力分析 a. General. (1) A stress analysis of gravity dams is performed to determine the magnitude and distribution of stresses throughout the structure for static and dynamic load conditions and to investigate the structural adequacy of the substructance and foundation. Load conditions usually investigated are outlined in Chapter 4. (2) Gravity dam stresses are analyzed by either approximate simplified methods or the finite element method depending on the refinement required for the particular level of design and the type and configuration of the dam. For preliminary designs, simplified methods using cantilever beam models for two-dimensional analysis or the trial load twist method for three-dimensional analysis are appropriate as described in the US Bureau of Reclamation (USBR), “Design of Gravity Dams” (1976).The finite element method is ordinarily used for the feature and final design stages if a more exact stress investigation is required. a.普通方法 (1)重力坝的应力分析是用以确定在静态和动态荷载作用下结构的应力分布和大小情况以及验证下部和基础的结构强度，荷载条件通常在第四章作了概述。 (2)重力坝的应力分析通过基于满足坝体类型、构造和设计精度要求的近似的简化方法或有限单元法。初步设计时，根据美国垦务局（USBR）颁布的“重力坝设计规范（1976）”，可以使用二维的悬臂梁模型或者三维的模型试验的简化方法。有限单元法通常用于对应力精度要求更高的详细和最终设计阶段。 b. Finite element analysis. (1) Finite element models are used for linear elastic static and dynamic analyses and for nonlinear analyses that account for interaction of the dam and foundation.The finite element method provides the capability of modeling complex geometries and wide variations in material properties. The stresses at corners, around openings, and in tension zones can be approximated with a finite element model. It can model concrete thermal behavior and couple thermal stresses with other loads.An important advantage of this method is that complicated foundations involving various materials, weak joints on seams, and fracturing can be readily modeled. Special purpose co