超宽带天线的分析与分析-电磁场与微波技术专业论文.docxVIP

II II 南京邮电大学全日制工程硕士研究生学位论文 ABSTRACT ABSTRACT Recently, with the popularity of wireless communication products, the ultra-wideband (UWB) technology has a fast development. Since the Federal Communication Commission (FCC) authorized the unlicensed use of the UWB (3.1-10.6 GHz) in February 2002, UWB system design and application have become the focus of the wireless communication in academic and industrial fields. UWB antennas, as the fundamental and essential part of the UWB wireless communication, have experienced many significant developments and have been getting more and more popular due to its simple structure, low cost, wide bandwidth, high data transmission rate and low power consumption. Micro-strip patch antennas, because of their advantages of low profile, low weight, low cost, easy fabrication and integration easily with other microwave circuit components, are used widely in commercial communication systems. In this thesis, a novel polygon UWB micro-strip antenna is analyzed and optimized. The main work is as follows. First of all, the knowledge of the UWB technology and the UWB antenna is introduced briefly. Secondly, the impedance bandwidth of the reference antenna is broaden by inserting rectangular slots to the radiator, the ground plane and the micro-strip line and adjusting the dimensions of the slots. Finally, some notched sub-bands are obtained by etching two T-shaped slots on the radiating patch. In summary, on the basis of the reference antenna, some optimization and design has been made in this thesis. The bandwidth of the reference antenna has a good improvement, and double-notched characteristics have been achieved, so the thesis has a certain practical significance. Keywords: Ultra-wideband the Ultra-wideband technology Ultra-wideband antennas Micro-strip antennas notched characteristics 南京邮电大学全日制工程硕士研究生学位论文目录 南京邮电大学全日制工程硕士研究生学位论文 目录 PAGE PAGE III 目 录 摘要I ABSTRACT II 目 录 III 第一章 绪论1 1.1 课题的研究背景及意义1 1.2 超宽带技术概述2 1.2.1 超宽带技术