反复荷载作用下钢-竹界面粘结性能的研究-结构工程专业论文.docx

Research on Bonding Properties of Bamboo-Steel Interface Under Cyclic Loading Abstrcat Steel structure system is the combination of specific fitting composites which are bamboo veneer and cold bending thin-wall steel, it is a high efficiency and energy-saving building structure system. It contains the advantages of both steel and bamboo, overcoming instable of the cold bending thin-wall steel and improving the ductility performance of the bamboo veneer. In this paper there will be a research on bonding properties of bamboo-steel interface under cyclic loading , contains exploring of the bond stress distribution curve , relative slip distribution rule of the interface and the bearing capacity of the bonding interface damage rule. An analysis of the interface’s strength is provide a reliable basis for the damage forms of the seismic disturbance such as dynamic loading for the research of structure . In this paper, total of 24 push-out specimens has been designed to two types of interface, respectively A group of 12 pure bonding interface specimens and B group of 12 composite bonding interface specimens. First, three specimens of each group has been designed for static load test, through the test, the bearing capacity and the strain data of the bamboo plate of the two kinds of interface are acquired. Based on the flat section assumption the theory expression of normal stress along the longitudinal, shear stress distribution, relative slip distribution was proposed. Second, three specimens of each group has been designed for the low cycle level load test, through the test to determine the bamboo-steel column specimens in load to the critical displacement of the linear and nonlinear stage, for the test of the repeated load displacement. The cyclic loading test sets the type of the bonding interface, the displacement of the cyclic loading as basic parameters, 12 push-out specimens are tested under cyclic loading test, data of the bearing capacity of specimens and the str