二维激光扫描系统中大工作面f-θ透镜设计-光学工程专业论文.docxVIP

Abstract F-θ lens is a key lens with special requirements in two-dimensional laser scanning system, which includes laser marking machine, laser printer, laser drilling machine and so on. The design of super wide field view f-θ lens and zoom f-θ lens both with large scan field is mainly studied in this thesis. By adopting a telescope structure and using a method of visual magnification, an f-θ lens with the field angle of 900 was obtained in the optical system. With the theory of zoom lens, the zoom f-θ lens was designed. It is a good method to correct aberration of the two designed lens by the use of the diffraction optics. Based on the analysis of primary aberrations, the parameters of initial structure were determined by PW method. And the super wide field view f-θ lens and zoom f-θ lens are gained with ZEMAX under practical constrained conditions. The designed lenses with large scan field are simple and compact, the linear distortion error of the lenses is small, the relative illumination is quite uniform, the energy concentration is high and the focusing performance is diffraction-limited. The main content of the thesis includes: Describing the characteristics of f-θ lens, it is primary to introduce barrel distortion to realize linear scanning. The major aberrations such as coma, astigmatism, field curvature and distortion in the f-θ lens are analyzed. In the purpose of correct aberration, the lens should be used to separate the lens structure, and should make the lens bend the lens aperture as much as possible. A super wide field view f-θ lens with the scanning angle of 900 was gained by using of the telescope magnification visual characteristics. It is much better to correct aberration by adopting hybrid refractive-diffractive lens. The result indicated that it is suitable for 2D laser scanning system. Applying the zoom principle to the f-θ lens, a zoom f-θ lens of excellent image quality with mechanical negative group compensation was obtained. Key words: Su