车载互感器校验系统的研究-电气工程专业论文.docxVIP

摘要 摘 要 I I 摘 要 近年来，我国智能电网蓬勃发展，对互感器的需求也日益增加。由于电子式互 感器在相比其他互感器在校对时具有非常大的优势，因此在现场检测中得到了广泛 的应用。在这样背景下，如何加强电子式互感器在校对时的准确性，得到了电力行 业的广泛关注，也具有非常深远的应用价值。 互感器在对电能仪器设备进行检测时起着非常重要的作用，同时也是电力行业 各相关单位进行结算时的主要装置。根据我国电力行业相关政策的要求，当电力行 业进行互感器的安装时，必须对其进行现场测量。通常情况下，现场的安装环境相 对比较复杂，当对互感器进行现场测量时，往往存在一定的危险。而且现场需要的 检测设备比较多，体积和重量也比较大，安装时需要大量的人力、物力，工作效率 也比较低。因此，开发一种集成式的车载互感器校验系统的研究非常有必要。 针对互感器现场检验的很多危险因素和工作效率比较低的现状，同时对目前我 国对互感器现场校对的几种方法进行了比较，提出了研制车载互感器校验系统的设 想。本设想的载体是车，中央控制管理单元为数字处理器，通过对车辆进行专业的 改装，配备先进的检验设备，沟通组成流动的检验试验室。研究的车载互感器校验 系统，既可以对互感器进行现场校对，也可以将需要的所有仪器集中在车上，满足 对互感器现场测量的基本要求，减少工作量，提高提高了现场的试验效率。 关键词：互感器现场校验；一体化作业；互感器校验仪；无功补偿 FFT Ab Abstract II II Abstract In recent years, the smart grid of our country grows vigorously, the demand for transformer is also increasing. In school because of the electronic instrument transformer in compared to other transformer pair has the very big advantage, therefore has been widely used in the field test. Under such background, how to improve the accuracy of the electronic transformer pair in school, get the extensive concern of the power industry, also have far-reaching application value. Detecting a transformer in the power equipment plays a very important role, and the settlement all relevant units in the power industry is the main device. According to the requirement of the electric power industry in our country related policy, when the electric power industry for the installation of the transformer, must carry on the field measurement. Normally, the scene of the installation environment is relatively complex, when field measurement was carried out on the transformer, there is often a danger. And the need of testing equipment is more, volume and weight also is bigger, when installation requires a lot of manpower and material resources, the efficiency is low. Therefore, to develop an integrated vehicle transformer calibration system study is very necessary. Many risk factors for transformer on-site inspection and the present situation of the work efficie