地震作用下窑尾框架结构框架梁局部稳定及节点性能分析-建筑与土木工程专业论文.docx

ABSTRACT Pre-heater tower is high-rise steel structure, which is different from the common civil building structure, but there is no domestic for this kind of building codes or specifications, the design of high-rise buildings for general reference. This paper takes a pre-heater tower structure as the research object, on the basis of previous studies, further research on the pre-heater tower structure frame beam and beam column joints be performed. The main work and conclusions of this thesis including following points： Firstly, In terms of the relevant revision of the Code for Seismic Design of Buildings of China（GB50011-2010）on the width-thickness ratios of frame beam, the quantity of steel will greatly increase. Adopting a finite element software to establish the pre-heater tower according to the Code of 2001 and 2010, investigate local stability of the frame beam according to the results of the earthquake dynamic analysis. Then determining suitable ratio limit for pre-heater under different seismic precautionary intensity is performed. Research results show that： The original structure can meet the requirements of the stability of the frame beam. Under different seismic grade，pre-heater frame beam Width-Thickness Ratio can be relaxed. Secondly, this paper introduces the structure and classification of pre-heater tower frame beam column node, using the finite element software ANSYS to do some research of nodes, as the deformation and stress of node and internal component. Then discusses the function and setting principles underpinning the joint stiffener. Research results show that, the node has good carrying capacity to meet the requirements of the relevant regulations, stiffened plate can effectively improve the mechanical performance of internal force of the node which has a large Internal force in support. Finally, using parameter analysis method on the compression performance of pre-heater tower structure typical of gusset plate frame beam column j