高强塑积钢热成形-淬火碳配分一体化工艺研究-材料加工工程专业论文.docxVIP

austenite primarily of a narrow film.Specimen of carbon-rich region between the martensite laths obvious. The optimum for the 9th (HS-QDP-15% -1 ℃ / s), 16.57% elongation, tensile strength of 1610MPa, strong plastic product for 26678MPa ?% more than 20000 MPa ?%.XRD detection methods for the content of retained austenite.94 steel stability and the carbon content of retained austenite steels have a close relationship. The average carbon content of austenite at the time of 1.10 wt.% Can be retained to room temperature, retained austenite TRIP effect under these conditions is remarkable. Follow in different condition the yield strength dissimilar, and the yield strength of the Specimens HS ~ QOP below HS ~ QDP. Specimen elongation and residual austenite conversion rate proportional relationship presents. Hot stamping the actual member, 22MnB5 parts of its strong plastic product for 10320 MPa ?%, only 10% elongation. After 94 # hot forming, the highest value of the product of strong plastic 16807MPa ?%, elongation rate of 13.1%, compared 22MnB5 enhance the effect is remarkable. These conclusions show that the combination of self-designed experiments steel (94 #) developed by HS-QOP technology and HS-QDP process used in hot stamping field potential, compatibility, and high mechanical properties. Key words: Advanced High Strength Steel, Hot Forming - Quenching Dynamic Carbon Partitioning Integration Process, Prodct of Strength and Elongation, The Residual Austenite III 南昌航空大学硕士学位论文 目录 目录  HYPERLINK \l _bookmark0 第 1 章 绪论 1  HYPERLINK \l _bookmark1 1.1 引言 1  HYPERLINK \l _bookmark2 1.2 先进高强钢研究进展 3  HYPERLINK \l _bookmark3 1.2.1 第一代先进高强度钢 3  HYPERLINK \l _bookmark4 1.2.2 第二代先进高强度钢 4  HYPERLINK \l _bookmark5 1.2.3 第三代先进高强度钢 4  HYPERLINK \l _bookmark6 1.2.4 先进高强度钢的应用现状 6  HYPERLINK \l _bookmark7 1.3 热冲压成形工艺的发展及现状7  HYPERLINK \l _bookmark8 1.3.1 热冲压成形工艺的概念 8  HYPERLINK \l _bookmark9 1.3.2 采用热冲压成形工艺的先进高强度钢板研发现状9  HYPERLINK \l _bookmark10 1.3.3