高层建筑竖向构件布置和合理设计研究.docVIP

高层建筑竖向构件合理布置研究 ［ ］伴随着我W社会经济的不断发展，城市人口密度的持续增加，高层建筑的层高和规 模也在不断增加，它不仅反映反映一个W家物质文明，血且也反应一个国家科学技术、经济发 展水平。剪力墙结构作为一种主耍高M建筑结构体系，它在现代高M建筑中的应用十分广泛， 凶此对高层建筑剪力墙结构的力学性能的研究具冇一定的理论和实践意义。本文通过工程实 例运用结构软件SATWE计算分析，对剪力墙的合理布置和对影响剪力墙的数量的因素进行 研究分析，根据剪力墙结构的层问位移限值，推导出确定剪力墙合理数量的简化方法，通过 调整剪力墙布置来研究结构的动力特性和变形特性。在满足结构规范耍求的条件下，削弱结 构内部剪力墙，使结构处于一个合理的刚度，可使得结构更加安全、经济和合理。 ［关键字］高M建筑；剪力墙结构；结构介置；合理数量；抗侧刚度；M间位移 High-rise buildingreasonable arrangementofvertical elements [Abstract] With the continuous development of social economy, the continued increase in urban population density, and size-storey high-rise buildings is also increasing, which reflects not only reflect a country material, but also reflects a national science and technology, economic development level. Wall structure as a major high-rise building structural system, which in the modern high-rise building is widely used, and therefore high-rise building wall structure of the mechanical properties of a certain theoretical and practical significance. In this paper, the use of structured software engineering examples SATWE calculation and analysis of the rational arrangement of shear walls and shear walls of a number of factors affecting research and analysis, according to the interlaminar shear wall structure displacement limits were derived to determine shear reasonable number of simplified method, by adjusting the shear arrangement to study the dynamic characteristics of the structure and deformation characteristics. Meet the structural requirements of the specification conditions, undermine the internal wall structure, the structure at a reasonable stiffness，so that the structure can be safer，more economical and rational. [Key word] High-rise buildings; shear wall structure; structural arrangement; reasonable quantity; lateral stiffness; layer displacement 目录 TOC \o 1-5 \h \z 擬 1 ABSTRACT 引* 1 — ＞绪论 2 HYPERLINK \l bookmark2 \o Current Document \h （一） 高层建筑的发展概况 2 HYPERLINK \l bookmark3 \o Current Document \h （二） 高层建构的结构类型和特点 2 HYPERLINK