U形件托架冲孔落料、弯曲冲压复合模具设计.docVIP

PAGE \* MERGEFORMAT 49 XXXX大学 毕 业 设 计 说 明 书 班 级： 姓 名： 学 院： 专 业： 题 目： U形托架冲孔、弯曲复合工艺研究及模具CAD/CAM 指导教师： 职称: 职称: 20**年**月**日 中 文 摘 要 根据零件图的设计要求，绘制零件的二维和三维图，进行冲压工艺分析，制定工艺方案，编制零件的加工工艺过程卡。设计内容还包括，排样图设计，总的冲压力计算机压力中心计算，刃口尺寸计算，弹簧、橡胶件的计算和选用，凸、凹模或凸凹模结构以及其他冲模的，零件的结构设计，绘制模具装配图和工作零件图等。编写毕业设计说明书。 比较工艺方案并确定工艺方案。计算毛坯的尺寸，设定各步半成品的尺寸并绘出工序简图。计算各个工序的工作压力，设计并绘出模具简图，选取各个合适的零件。了解落料模、弯曲模、冲孔模的特点和需要注意的问题，在模具简图的基础上进行模具结构工艺性分析，进行模具结构设计并选择冲压设备。进行凸凹模工作尺寸的计算和设计。 关键词： 工艺方案；模具简图；结构设计 Bracket stamping process and die design ABSTRACT According to the plan design requirements for spare parts, rendering parts of the two-dimensional and three-dimensional map, a stamping process analysis, formulation of the program, parts of the process of processing cards. Design elements include, layout design plans, the overall pressure on the computer-pressure center, the edge size, springs, rubber pieces of calculation and choice, punch, matrix or punch matrix of the structure and other parts of the structure design And draw die assembly and work plans, and other parts. Design Manual prepared by graduation. Comparison of the programme and to identify technology programmes. Rough calculation of the size, each step setting the size of semi-finished products and processes drawn sketch. Calculation of the pressure of work processes to design and mold drawn sketch, select the appropriate parts. Learn blanking die, bending die, Piercing Die attention to the characteristics and needs of the problem, in the mold thumbs die structure on the basis of analysis, structural design and choose die stamping equipment. Tuao-size work for the calculation and design. KEY WORD: Craft project；mold diagram；structure design 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc263790408第一章 前言 PAGEREF _Toc263790408 \h 5 HYPERLINK \l _Toc263790409第二章 工艺分析及模具设计 PAGEREF