基于IDE硬盘的数据采集存储系统研究-水声工程专业论文.docxVIP

哈尔滨工程大学硕士学位论文ABSTRACT 哈尔滨工程大学硕士学位论文 ABSTRACT It is required that original data should be stored in real time for the sake of the processing and analysis of them aftertime，especially in the field of aviation and space、telemetry、modern electronic technology and SO on．Under the background of the development those，then there are cries for the bulky、low power、reliable、small、twopenny data collection systems． Hard disks playing important role in the data collection systems for its small volume，for its capacity and its direct access．Thereupon，Hard disks are in place of the parallel processing systems and the tape recording systems．In usual the storage systems based on hard disks are always used in computers dependently, then it result in the limits of the speed、volume and the application situation．So we excogitated the special control equipment for the data collection systems． This paper analyses the high speed data collection and the real time storage design with the using ofDSP、FPGA、CPLD、double-ported RAM on base oflDE hard disk． For the sake of the later processing of the collecting data when connecting the hard disk to the computer after the collection and in allusion to the type of the files in the operating system that stored，the FAT32 for the data storage specified． The mode of PIO is adopted in the write and read of dates transferred to from the hard disk，as a result，the speed of the transfers and the difficulty for programming are matched， For the convenience of transferring of the collecting data，we used interface of USB in the design and fulfilled the design of simple portable hard disk． The device has been debugged successfully,data of several channels can stored in real time with no losing，meanwhile，the files Can be opened and call be accordingly disposed in the operation system． Key Word：data collection；IDE hard disk；DSP；FPGA；Format of FAT32； Mode ofPl0 哈尔滨工程大学学位论文原创性声明 哈尔滨工程大学 学位论文原创性声明 本人郑重声明：本论文的所有工作，是在导师的指导 下，由作者本人独立完成的。有关观点、方法、数据和文 献的引用已在文中指出。除文中已注明引用的内容外