厚矩形板在均布载荷作用下的弯曲理论及其工程应用-结构工程专业论文.docxVIP

燕山火学理学硕士学位论文Abstract 燕山火学理学硕士学位论文 Abstract This paper generalized reciprocal theorem method(RTM)to solve the problems of the bending of thick rectangular plates based on Reissner’s theory for thick plates．The reciprocal theorem was given and proved．Then we solved the bending of thick rectangular plate under uniformly distributed load with different boundary conditions．This paper can be divided into three parts． The first part deals with some fundamentN theory．First，the fundamental equations of Reissner’s theory are given．Second we introduce the modified proposition of reciprocal theorem which are the basis of the calculation in this paper．And we give the basic solution of thick rectangular plate，introduce the exact free comer static conditions，lays the foundation for the behind computation． In the second part some examples are calculated and analyzed．First．the deflection fmaction and its numerical values of bending thick rectangular plate with four edges simply suppoaed，four fixed edges，relative fixed edges and relNive free edges，adjacent edges simply supposed and adjacent free edges and supported comer,adjacent fixed edges and adjacent free edges and supported comer，adjacent edges simply supposed and adjacent free edges and impended comer under uniformly distributed load with different edges conditions are given．Second，we take a contrast with traditional results or those from Ansys，explained the reciprocal theorem accuracy．During the analysis of these examples，a lot of tables and graphs are displayed so that to illustrate the results worked out． The third part deals with project application．In actual project the thick rectangular plate result and this article which uses the reciprocal theorem of thick rectangular plate carried on the comparison，explained the reciprocal theorem has the very high practical significance in application． II ； ； 垒!!塑垒 Keywords Reissner theory；thick rectangular plate；bending of plate； reciprocal theorem；basic solution tIl 燕山大学硕士学位论文