互感器自动检定系统业务流程分析-控制工程专业论文.docxVIP

华 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract As a widely used device in electric system, the current transformer has a big market. However, the various performance indicator and the complicate step-up/down procedure make the traditional manual inspection inefficient. The automatic test system designed for the current transformer avoid the tedious manual inspection. So, how to design current transformer automatic verification system to facilitate system development, maintenance, and possible upgrade has become a problem necessary to be solved. By analyzing the operating process of the operating process of existing current transformer, solving the problems emerged during the developing and maintenance of the system, the goal of improving the automatic test system is achieved. At first, a real automatic test system for the current transformer was introduced on three aspects. They are hardware, operating process and system interaction. Then the mathematic model was established according to the operating flow chart of the system to facilitate the analysis of business processes. The key points in designing such systems were also summarized based on the demands revealed during development, adjustment and operation of the system. After this, based on the general principles of Weak Coupling and Open-Closed Principle, using the object-oriented developing method, the logical layer and interface layer were separated. Then logical base class and interface base class are established to assist the design of the system. At last, the design was verified on a real system. The proposed method can provide certain guidelines in the design of the automatic current transformer test system with good flexibility and extensibility. And as it is based on a thorough understand of the system, it can offer help to the onsite construction. Keywords: Current Transformer Business Process Automatic Test System PAGE IV PAGE IV 目 录 摘 要I Abstract II 1 绪论 1.1 研究背景和意义 1 1.2 国内外研究概况 2 1.3 研究的内容与采取的方法3 1.4