周旭毕业设计(通过版).docVIP

摘要 木论文研究的是设计与制作LED点阵式电子显示屏。 木论文对LED电了显示屏进行一系列研究，完成的主要工作是LED点阵显示 屏的设计、硕件电路的制作、软件系统的编写、最后进行仿真与调试。 设计了一种电了显示的结构，该结构由PCB板、AT89S51芯片、8*8点阵显 示屏三部分组成。它具冇成本低，显示清晰的特点。本论文主要深入进行下述三 方面工作：设计了一种高精度、高稳定性的硬件电路；设计了一种限流式电路来 保证整个LED点阵电路的稳定性，使电路的损坏机率达到最小。LED点阵显示屏 采用单面机的工艺库、PROTEUS软件进行模拟仿真。从仿真结杲可以得到，整个 LED点阵显示屏的性能已达到设计指标要求。 当今世界，电子技术迅猛发展，点阵式显示器件作为现代信息显示的重要媒 体，在金融证券、体育、机场、交通、商业、广告宣传、邮电电信、指挥调度、 国防军事等许多领域屮得到了广泛应用。因此点阵式显示器件的研制、生产也的 到了迅速的发展，并逐步形成产业，成为光电子行业的新兴产业领域。目前，点 阵式显示器件具体包括LED显示模块和LCD显示模块等。现在发展的LCD比较先 进，LCD的优点较为明显，他体积小，容易控制，功能强，价格适宜，能够适应 显示器的发展方向，因而在通信、家屯、大屏幕投影等领域得到了越来越广泛的 应用。 关键词：AT89S51芯片PCB板8*8点阵显示 Abstract This thesis is the design and production of LED dot matrix display panels In this thesis, a series of LED electronic display to complete the main task is the design of LED dot matrix display, the production of hardware, software, system preparation, the final simulation and debugging. Design of an electronic display structure, which by the PCB board, AT89S51 chip, 8*8 dot matrix display consists of three parts. It has the characteristics of low cost and clear display. Depth of this thesis the following three aspects: design of a high precision and high stability of the hardware circuit; designed a current-limiting circuit to ensure the stability of the LED matrix circuit, the probability of damage to the circuit Minimum. LED dot matrix display with single unit of library, PROTEUS simulation software. Can be obtained from the simulation results, the performance of the LED dot matrix display has reached the design requirements. Todays world, the rapid development of electronic technology, dot-matrix display shows the importance of modern information media, in financial securities, sports, airport, transportation, commerce, advertising, Posts and Telecommunications, Command and Control, defense and many other areas have been Widely used. Therefore, dot matrix display of the development, production also of the rapid development, and gradually formed the industry to become the industr