电站锅炉用等离子点火系统关键技术研究材料加工工程专业论文.docxVIP

中文摘要论文题目：电站锅炉用等离子点火系统关键技术研究 中文摘要 论文题目：电站锅炉用等离子点火系统关键技术研究 专 业：材料加工工程 硕士生：武飞(签名)量：指导教师：周好斌(签名)霎b斗：g 摘要 等离子点火系统实现了电站锅炉无油点火启动，节约了大量燃油，产生了较大的社 会效益、安全效益和经济效益。等离子点火方式代表了电站锅炉点火技术的发展方向和 未来。 本文在介绍了电站锅炉等离子点火系统组成、工作原理、设计思想和关键技术的基 础上，提出等离子发生器是等离子点火系统中的一个重要部件。通过建立描述等离子发 生器内部流动和传热的数学模型，对等离子发生器的流场空间进行空间离散，采用 SIMPLE算法来求解离散方程，运用FLUENT软件对等离子发生器的空气流场进行了数 值模拟，获得等离子发生器内部温度场、速度场和压力场的数值解。根据数值模拟温度 场、速度场和压力场的分布云图，分别对普通等离子发生器和改进后等离子发生器的阴、 阳极壁面温度进行了对比分析。由数值模拟结果分析可知：味加入隔板时，增加气流压 缩角将使阳极壁面的温度升高；加入隔板时，阴、阳极壁面的温度降低。提出了等离子 发生器的结构设计和电极冷却方式的合理建议。 由FLUENT数值模拟结果分析可知，改进后的等离子发生器具有寿命长、稳定、可 靠、安全等性能。 关键词：电站锅炉等离子点火FLUENT数值模拟 论文类型：应用技术研究 U 英文摘要Subject： 英文摘要 Subject： Research on Key Technology of Plasma Ignition System in the Power Boiler Speciality ：Material Processing Engineering Name： Wu Fei(signatu Instructor ：Zhou Haobin( ABS。¨太AC。I。 The plasma ignition system realized the power boiler non-oil ignition to start，which can save the massive fuel oils，that has big social efficiency,security benefit and economic efficiency．Plasma ignition way has represented direction and the future of the power boiler ignition technology． In the paper,plasma generator which is an important part in plasma ignition system，on the base of the introduction of the composition,the principle of work；the concept of design and the key technologies of the power boiler．The temperature field，the velocity field and the pressure field numerical solution of the plasma generator interior are obtained through establishing interior flowing and heat transfer mathematical model of the plasma generator； dispersing the space of the plasma generator,applying the SIMPLE method to solve the separate equation；air flow field of the ignition generator Was made using the FLUENT software．The temperature of ordinary plasma generator and improvement the plasma’S surface is contrasted separately through numerical simulation temperature field，velocity field and pressure field distributed cloud chart．By the numerical simulation result analysis，it Was known that