基于DSP的三相应急电源的研究-电力电子与电力传动专业论文.docxVIP

安徽理工大学硕士论文Abstract 安徽理工大学硕士论文 Abstract With the rapid developing of socitity and modem science and technology,such communal facilities as the skyscraper,hospital and factory，etc．will be higher and higher to the demand for supplying power．It will cause great accident or economic losses in the event of power interruption．The Emergency Power Supply(EPS)can offer the electric energy for equipment in various kinds of occasions while the power intemuption．It is important to research the high-powered Emergency Power Supply． By studying the EPS thoroughtly,the article developes OUt kind of llJc、／I，EPS system，and carries on the optimum design for each part of EPS．First of all，the converter is essential part of EPS，which directly affectes the waveform quality and the efficiency of EPS．Traditional method employes symmetry sampling arithmetic to control the converter,which resultes in much harmonic，distortion waveform and insufficiencie of DC utilization．In view of these insufficiencies，combining the technical tendency,the article raked SVPWM algorithm and digite control technology to improve the quality and the efficiency of EPS waveform．Moreover,switching the city power supply to the EPS supply security and fastly is important aspect of the EPS．In the switching process，in order to avoid the static switch is bum down for the circulation，phase lock loop，identifity phase and convert phase have been researched and used in EPS to enhance the security and the reliability of EPS．The article also gives full consideration to the current impact question，and USeS the soft start-up and instantaneous restrain current loop and other several kindes of overflow protective measures，thus the ability of EPS system to resist the overflow current is enhanced． based on theoretical analysis and optimum design，EPS experiment circuit has been builted on the SY-MCK2407 board，relative software has been designed，Series experiment are Carried on．Experiment results show that the new EPS performance has gr