基于DSP的三闭环应急电源的研究与设计-电力电子与电力传动专业论文.docxVIP

万方数据 万方数据 Abstract Nowadays, the application of electric energy is becoming more and more popular. With the growing awareness of environmental protection and fire protection and people’s constant eagerness of improving life quality, the reliability of power supply is a problem which cannot be ignored. In recent years, considering its unique advantages and environmental protection, Emergency Power Supply(EPS) is in increasing market demand, especially in firefighting, emergency lighting and other occasions. This paper studies a three-loops control for emergency power supply based on DSP. It begins with the concept of EPS, introducing its types, application and future trend of development. At the same time, the difference between the Emergency Power Supply with the traditional UPS and the diesel generator is illustrated respectively. Then this paper focuses on a in-depth study in software and hardware of the three-loops control emergency power supply. The overall design of the emergency power supply is introduced, and the working principle, technical specifications and each functional module of the system are described in detail. The charging system, inverter system, control system of EPS is designed both in hardware and software , the function of each module is illustrated in detail, and the parameters of the module components are designed, and a schematic diagram is drawn in this paper. With respect to the design of charging system of EPS, this paper adopts maintenance-free lead-acid storage battery, using a four-part charging mode. The main circuit of charging chooses a full-bridge topology and the parameters of its components are designed in detail. As for the inverter system, the main part of the paper, is the hard core of Emergency Power Supply. This part starts with the principle of inverter, introduces a variety of modulation modes and finally chooses the unipolar SPWM modulation, using a digital PID control algorithm and the three closed loop feedback method