基于dsp的嵌入式远程监控系统的研究-控制理论与控制工程专业论文.docxVIP

厂东：l：业大学硕士学位论文Abstract 厂东：l：业大学硕士学位论文 Abstract Since the control network appeared，there have been several primary industrial contr01 networks such as DCS，Fieldbus，and Industrial Ethemet． With the development of the industrial contr01 network，Industrial Ethernet become the trend Of the industrial contr01 network because of its the opening， transparent communication protoc01． The remote monitor system is an important application field of Industrial Ethernet．If instrument haVe the fllnction of TCP／IP protocol， these field devices could communicate to the infbrmation network and make it possible to integrate the control network and the information network．So field data could be monitored at anytime and anywhere by the Client in the workstation． The thesis firstly introduces the research background，the research present situation and the research meaning．Then，author introduces the solution about remote monitor system in details and illustrate the important device—the embedded contr01ler．which is linked to the Ethernet—based control system． After the system design finished，author illustrates how to inlplement the hardware and sof、ware of the embedded controller．The structure of the embedded controller，the selection of the core chip，the interface module fbr intelligent instrument and applications procedure are given in details．Also analyzed TCP／IP protoc01 stack． Finally，the thesis put fbrward a security strategy fbr resolVing security of the system；Make a simulative test to the system software；Performance analyses of the system is giVen，the result of the analyses show that the reflection time of the system ar“Ves to ms level．These sati sfy the remote monitor system in real time demand． Key words：DSP；embedded system；TCP／IP；Ethernet； remote monitor II 第一章绪论第一章绪论 第一章绪论 第一章绪论 1．1引言 在仪器仪表迅速发展的同时，计算机和网络技术也在迅速发展，PC 机已经从高速增长进入到平稳发展时期，单纯由Pc机带领电子产业蒸蒸 日上的时代己经成为历史，嵌入式系统的出现和广泛应用，使计算机和 网络进入了后Pc时代。把嵌入式系统应用到仪器仪表领域，让传统的仪 表，传感器和微处理器相结合，可产生功能强大包含网络接口的智能传 感器(smart sensor)、现场智能仪器仪表及现场测控单元。芯片、总