基于DSP的数字图像测量系统-信号与信息处理专业论文.docxVIP

武汉理工大学硕士学位论文则，就能够计算如周长、面积之类的对象尺寸。最后，经过在DSP平台上 武汉理工大学硕士学位论文 则，就能够计算如周长、面积之类的对象尺寸。最后，经过在DSP平台上 运行程序的实验结果表明，本系统可以对对象进行实时动态的检测，结果 具有较高的精确度，能够满足一般性的应用要求。 关键词：DSP、图像测量、边缘检测、边缘追踪 II 茎堡望三查堂堡主兰垡丝苎Ab 茎堡望三查堂堡主兰垡丝苎 Ab stract Besides the characteristics of dependability，non—contacting and automation，modern industrial production requires product detection to be very fast and precise，SO it needs the real-time measurement system．Some times，artificial detection is better than machine detection，but there are some problems with artificial detection，for example，artificial detection is slow and the operator should be tired．These problems should reduce the precision of detection，SO we need a faster auto—detecting method which is also more precise．In this day，image processing technology is gradually perfect and reliable．It is possible to use image processing to SOlVe this problem． Along with the quick development of image processing and digital signal processor，common DSP chips were widely utilized to image processing． Extracting digital image from video signal inputted by CCD camera and processing the data stored in buffer to get the final result are the main works of image processing system．The processed data should been stored in DSP’ storage or PC，and the result should be displayed on the screen．In this system，hexadecimal data should be stored in buffer．SO it iS convenient for programmer to use the data directly．Now we can see that image processing algorithm and software designing are the main work in our research． Firstly,we introduced the significance and development of image measurement system in a whole，then introduced video signal，the theory and work method of CCD camera，and explained the system’S hardware and store structure．Image processing algorithm is the main problem in our research．We must process and analyze the original image before extract dimension character from image to get the dimension data．Edge detection is the precondition and basis of image segmentation and featu