微电脑控制培训.ppt

* …to the oil temperature. Up to 6 items can be tracked and displayed at a time. These displayed items are chosen from a list of 244 values in the panel. The list of items is accessible on the “Trend setup screen”, and can be changed from the “Operator” or “Service” Access Level. * The next five screens show how to change a setpoint from the evaporator screen with its associated “pop up” box. * This shows the “Change Setpoints” button which when pushed displays the next screen. * This screen shows the “pop up” screen asking for a “User ID” which if correctly entered shows the next screen. * This screen shows the area to enter the password. * This screen is displayed if a proper password is entered. The change setpoints button is gone, and the 4 additional setpoint buttons have appeared. The access level in the right side of the status bar has changed from “View” to “Operator” and would be on all other screens at this point. Logging out is done on the “Home” screen to return to the “View” level. * This screen shows the “pop up” box if the first setpoints button had been pushed to change the leaving chilled water temperature. It lists the range for the setpoint, default value, and the current programmed value. * These next three slides show the different types and colors of status messages. This is a satisfactory condition and is shown is green. * LCSSS-SERIAL COMMUNICATIONS LCSSS-通讯口串行 LCSSS-SHUTDOWN-REQUESTING FAULT DATA LCSSS-停车-需要故障数据 LCSSS-STOP CONTACTS OPEN LCSSS-停车触点断开 LCSSS-LOW PHASE (X) TEMPERATUERE SENSOR LCSSS-相(X)探头低温 OIL- HIGH TEMPERATURE 油-高油温 OIL- LOW DIFFERENTIAL PRESSURE 油-低压差 OIL- LOW DIFFERENTIAL SEAL PRESSURE 油-低轴封油压差 OIL OR CONDENSER TRANSDUCER 油或冷凝器探头故障 OIL- CLOGGED FILER 油-过滤器脏堵 OIL SEPERATOR-LOW LEVEL 油分离器-低油位 LCSSS-OPEN SCR LCSSS-SCR断开 LCSSS-PHASE ROTATION LCSSS-反相 * Notes * * * * * * * The next five screens show how to change a setpoint from the evaporator screen with its assoc