节点核心区混凝土强度对超高层混凝土结构抗震性能的影响分析-土木工程专业论文.docxVIP

II万方数据 II 万方数据 Abstract During the seismic design of super high-rise structures, the huge differences of concrete strength grade between beams and columns is inevitable. In order to ensure the capacity of the core joints, the concrete strength of core joints must be the same as the concrete strength of columns, however the traditional construction method is easy to make quality problem in the construction, so that the capacity of core joints can’t meet the requirement of design. If use the construction method of sandwich joints, not only can guarantee the quality of joint core area construction but also can save time. But when the concrete strength of core joints is the same as the concrete strength of beams lower than concrete strength of columns, the super-high rise concrete structures weather meet the requirements of no damage in small earthquake, repairable under moderate earthquake, no collapse under rare earthquake seismic fortification goal is not clear. So it has important theoretical value and practical significance by research on the seismic performances of super high-rise structure affected by strength of concrete in joint core. In this paper, using the finite element analysis software MIDAS/GEN, establish the model that the concrete strength of core joints is the same as the concrete strength of beams (model 1), simulates the super-high rise concrete structure that use the construction method of sandwich joints, establish the model that the concrete strength of core joints is the same as designs (model 2), simulates the super-high rise concrete structure that use traditional construction method. Response spectrum analysis, push over analysis and the theoretical analysis of the seismic bearing capacity of core joints. The main contents of this paper are: Through response spectrum analysis, read the results of the two models like first 6 vibration, the period, cycle ratio, the ratio of stiffness to weight. The results indicate that the two models. bu