胶印制版数据化与规范化研究-制浆造纸工程(印刷工程)专业论文.docxVIP

西安理工大学硕士学位论文Title：STUDY 西安理工大学硕士学位论文 Title：STUDY ON THE DIGITIZATION AND STANDARDIZATION OF THE OFFSET PLATEMAKING Major．Printing Engineering Name： Faqiu LU Signature： Supervisor：prof．Xin LIU Signature： Abstract The digitization and strandardization quality management is an important part of the way that improved production quality in the printing company with the advancement of science and technology．The purpose is to study on the technologic parameters of offset plate—making, obtain the optimized printing technologic parameters，ensure the consistency between printed matter and manuscdpt,promote the development of offset plate-making,enhance the quality of printed matter,reduce the production cost，increase economic benefit and offer reliable data for printing companies’standardization． The main parameters were researched based on the printing chromatology and the offset technology principles combining with the FUJI control strip and the offset plate—making test form．The single factor optimization Was used to analyze the expose value，develop speed， screening frequency and percent dot area．The exact apparatuses ensure the precision of data． The mathematics models were established based on regression analysis． In terms of the PS plate and the FUJI control strip，the experiments were designed by changing technologic parameters．The relations between the main parameters and the dot percentage were analyzed and the mathematics models were established．According to studying request,the offset testing plate was designed．Via the experiments,the optimized printing down parameters were gained．The CUTVCS of printing gradation，dot compensation and gray-balance density were established and the equations were fitted．The Curve and the equation between Sclecn frequency and dot·gain value were obtained．The rule between dot shape and dot gain values Was foUnd． It has indicated：The optimal expose value of Huaguang PS plate ranges from 42／x‘sto 50tr·S