关于百分比的翻译方法.docxVIP

关于“重量百分比/重量百分含量”的表达方法主要有以下几种： 1、 经查询，by weight percent的用法很常见，主要有以下几种： , by weight percent： 10% (of) A, 20% (of) B, 30% (of) C, 40% (of) D, , by weight percent： 10 percent (of) A, 20 percent (of) B, 30 percent (of) C, , by weight percent： 10 A, 2() B, 3() C, 4() D, , by weight percent： A 10(%), B 20(%), C 30(%), D 40(%), 但经查询母语为英语的国家申请专利中，一般不使用“ ，by the weight percent： ” 2、 也可以使用 in percentage by weight,用法同 by weight percent； 3、 有时也使用by weight,但一般放在成分比重的后面，如例6； 4、 有时也使用 by weight of, 一般结构为： :10% by weight of A, ，” 如例 7； 翻译时可参照以下几例的表达方式: 例 1： (EN) (WO 2009/126954) A martensitic stainless steel alloy is strengthened by copper-nucleated nitride precipitates. The alloy includes, in combination by weight percent, about 10.0 to about 12.5 Cr, about 2.0 to about 7.5 Ni, up to about 17.0 Co, about 0.6 to about 1.5 Mo, about 0.5 to about 2.3 Cu, up to about 0.6 Mn, up to about 0.4 Si, about 0.05 to about 0.15 V, up to about 0.10 N, up to about 0.035 C, up to about 0.01 W, and the balanee Fe and incidental elements and impurities. The nitride precipitates may be enriched by one or more transition metals. 例 2： (EN) (WO 2007/017161) A low-alloy steel containing, by weight percent, C 0.03-0.13%, Mn 0.90-1.80%, Si 0.40%, P 0.020%, S 0.005%, Ni 0.10-1.00%, Cr 0.20-1 .20%, Mo 0.15-0.80%, Ca 0.040%, V 0.10%, Nb 0.040%, Ti 0.020% and N 0.01 1 % for making high-strength, weldable steel seamless pipe, characterized in that the microstructure of the alloy steel is a mixture of bainite and martensite and the yield stress is at least 621 MPa (90 Ksi). 例 3： (EN) (WO 2004/059026) The present invention provides a process of producing a family of hot rolled dual phase steel sheets having excellent: formability and stretch flangeability, with yield strengths of from about 500 MPa to about 900 MPa from a single steel chemistry consisting of, by weight percent, 0.02-0.15 % of C, 0.3-2.5 % of Mn, 0.1-2.0 % of Cr, 0.01-0.2 % Al, 0.001-0.01 % Ca, not more than 0.1 % P, not more tha