61558-2-6TUV线性测试计划.docVIP

Standard: EN61558-1:1997+A1+A11 EN61558-2-6:1997 Page PAGE 1/ NUMPAGES 13 FOY TIME \@ M/d/yyyy 6/23/2008 Engineer WXQ Client: Lab Engineer Appliance: AC / DC transformer Requested Date 26/ Model No. MKD41 DC Series Expected Date: Sample No. Report No. SAP No. + Item Full test FORMCHECKBOX Retest FORMCHECKBOX Lab Measurements return to Engineer directly FORMCHECKBOX (If no tick, put into default tray) Lab Use Only Lab Start Date / Lab Finish Date / FORMCHECKBOX For modification / retest, changes from last model: ______________________________________________ Product technical data Power inlet class Direct plug-in IP index IP4X Mobility Portable Time of operation Continue Intended use Independent Short-circuit proof Fail-safe Rated Supply Voltage FORMTEXT 230V~ Rated Supply Frequency FORMTEXT 50Hz/60Hz Rated Output Voltage See model list Rated Output Current See model list Rated Ambient temperature 25 °C Test item Clause Description Clause Description 11 Measuring output 18.3 Dielectric strength 12 Measuring no-load output 18.4 High frequency 14.2 Heating 19.15 Strain on socket-outlet 15 Abnormal 20.9 Protective device 16.2 Impact 27.1 Ball-pressure for enclosure 16.4 Tumbling, turn torque and pull 27.2 Glow-wire for enclosure 17.2 Humidity 27.4 Ball-pressure glow-wire 18.2 Insulation resistance Date Signature Date Signature Date Signature Test Engineer Check by Approved by Note: Clause 11.1 and 12 tested when steady state reached, So measured immediately after 14.2 heating test. 11.1(d) O/P Voltage and output current under load Test Supply Voltage 230V Model Rated O/P Load Impedance (Ω) Measured O/P Voltage Deviation 230V 230V MKD41-0600500 6VDC, 500mA 12 MKD41-0600600 6VDC, 600mA 10 MKD41-0600800 6VDC,800mA 7.5 MKD41-0601000 6VDC,1000mA 6 Remark Deviation must less than 10% 12 No-load output voltage Test Supply Voltage 230V Model Output (VA) Measure