海洋柔性管道拉弯组合疲劳试验机设计研究-工程力学专业论文.docxVIP

海洋柔性管道拉弯组合疲劳试验机设计研究Design 海洋柔性管道拉弯组合疲劳试验机设计研究 Design of the Dynamic Fatigue Test Machine for Stretching and Bending Flexible Pipe Ab stract W油the development of deepwater oil and gas resources in China,a large number of dynamic flexible pipes are needed，and the flexible pipe is indispensable equipment for deepwater oil and gas exploration．Due to the complex structure of the flexible pipe，the current theory and numerical methods Can not accurately simulate the mechanical behavior of the pipeline．Especially for the fatigue life of the dynamic flexible pipe，the effective numerical simulation Can’t be carried out at present．and the fatigue life test of the actual working conditions is usually required．At present，there are only a few foreign countries carrying out the simulation of the fatigue life of the flexible pipe under the working conditions．In recent years，the design and manufacture of flexible pipe has been studied in China,but it has not been simulated the fatigue test under the working conditions．On the one hand，there iS no domestic research into a practical flexible pipe．on the other hand．there iS no research and development into a practical fatigue testing machine． This paper comprehensively consider flexible pipe bending section under actual working conditions，using computational conlrol the actuator for the real simulation of pipe in the position of heave and roll，realized the accelerated fatigue test of the common flexible pipeline．In order to ensure the fatigue damage and the actual conditions fit，the loading condition ofthe test specimen iS in line谢th the actual condition ofthe pipe．11IliS paper based on the design principle of fatigue testing machine，the overall design，basic design，detailed design of the test machine system，and the important design parameters are analyzed．Due to the complex working conditions and large load，the deep sea flexible pipes have higher requirements on the pipeline structure in the design of the testing machine，SO adopting fra