回收废气中醋酸丁酯的分析-制药工程专业论文.docxVIP

of butyl-acetate, liquid-gas ratio and inlet gas flow rate were taken into consideration for the recovery of butyl-acetate, the gas absorption coefficient KYa and the height of transfer unit HOG. Results showed that when HYPERLINK /dict_result.aspx?searchword=%e8%b4%a8%e9%87%8f%e6%b5%93%e5%ba%a6amp;tjType=sentenceamp;styleamp;t=mass%2Bconcentration mass concentration of butyl-acetate was 0.535g/L, liquid-gas ratio was 1.25L/m3and inlet waste gas flow rate was 4L/min, the recovery of butyl-acetate could reach 94.1%.KYa was 102.9kmol·m-3·h-1 and HOG was 0.37 m. Conclusions: Mixture solution of methyl-oleate and ethyl-oleate is suitable for recovery of butyl-acetate from waste gas. Both of packing tower absorption-stripping desorption and collision absorption-stripping desorption can get high recovery and lower energy. The best process should base on the local condition. KEY WORDS: absorption; desorption; butyl-acetate; simulation. 目 录 HYPERLINK \l _bookmark0 第一章 文献综述 1 HYPERLINK \l _bookmark1 1.1 回收废气中醋酸丁酯的必要性1 HYPERLINK \l _bookmark2 1.1.1 醋酸丁酯的用途1 HYPERLINK \l _bookmark3 1.1.2 醋酸丁酯的性质2 HYPERLINK \l _bookmark4 1.1.3 醋酸丁酯的合成2 HYPERLINK \l _bookmark5 1.1.4 醋酸丁酯废气的危害3 HYPERLINK \l _bookmark6 1.1.5 醋酸丁酯废气的来源3 HYPERLINK \l _bookmark7 1.2 处理技术进展4 HYPERLINK \l _bookmark8 1.2.1 醋酸丁酯废水治理研究进展4 HYPERLINK \l _bookmark9 1.2.2 醋酸丁酯废气治理研究进展5 HYPERLINK \l _bookmark10 1.3 气液传质设备6 HYPERLINK \l _bookmark11 1.3.1 塔设备在吸收中的应用6 HYPERLINK \l _bookmark12 1.3.2 撞击流吸收器简介7 HYPERLINK \l _bookmark13 撞击流原理7 HYPERLINK \l _bookmark14 撞击流强化传质7 HYPERLINK \l _bookmark15 撞击流在气液吸收中的应用8 HYPERLINK \l _bookmark16 1.4 研究目的、研究意义与研究内容8 HYPERLINK \l _bookmark17 1.4.1 本文的研究意义8 HYPERLINK \l _bookmark18 1.4.2 本文的研究目的8 HYPERLINK \l _bookmark19 1.4.3 本文的研究内容9 HYPERLINK \l _bookmark20 第二章 填料吸收—汽提解吸过程的模拟研究 10 HYPERLINK \l _bookmark21 2.1 概述10 HYPERLINK \l _bookmark22 Aspen Plus 对吸收和解吸过程的模拟 10 HYPERLINK \l _bookmark23 Aspen Plus 简介 10 HYPERLINK \l _bookmark24 2.2 计算方法和模