新造船英文合同.docVIP

考虑到 1）艘 (HULL NO. ) （船号：） {This CONTRACT, entered into this day of ____________by and between____________ , a corporation organized and existing under the Laws of____________, having its registered office at ____________ (hereinafter called the Buyer ) on one part; and ____________, a corporation organized and existing under the Laws of ____________, having its registered office at ____________ (hereinafter called the Seller) 本合同由 __________________（依照 ________ 国律组建和存续的一家公司， 作为一方以下简称为 “买方”）和 __________________（ ________ 国律组建和存续的一家公司，作为一方以下简称为 “卖方”）于 ____________日订立。 WITNESSES 鉴于 In consideration of the mutual covenants contained herein, the Seller agrees to build, launch, equip and complete at the Sellers Shipyard and to sell and deliver to the Buyer after completion and successful trial one (1) Vessel as more fully described in Article I hereof, to be registered under the flag of and the Buyer agrees to purchase and take delivery of the aforesaid Vessel from the Seller and to pay for the same in accordance with the terms and conditions hereinafter set forth. 本合同所含的双方承诺，卖方同意在卖方的船坞建造、下水、装配和完成一（ ____________船，并在完工和试航成功后将本船出售和交付给买方， 本船的具体细节将在本 合同第一条中说明。 本船将悬挂 ____________旗，买方同意向卖方购买和接收前述船舶， 并 按照以下条款和条件支付本船造船款。 ARTICLE I DESCRIPTION AND CLASS 第一条 说明和船级 1. DESCRIPTION:1 说明 The Vessel is a metric tons deadweight, at designed draft of meters (hereinafter called the Vessel) of the class described below. The Vessel shall have the Sellers Hull No. and shall be constructed, equipped and completed in accordance with the following Specifications: 本船取得下述船级，在设计吃水 ____________ 米时， 载重量为 ____________公吨的船舶 （以下简称本船） ，本船 的卖方船号为 ____________ ， 其建造、安装和完成应按下列说明书进行： (1)Specification (Drawing No. ) （ 1）技术规格书（图号： ） (2)General Arrangement (Drawing No. ) （ 2）总布置图（图号： ） (3)Midship Section (Drawing No. ) （ 3）舯横剖面图（图号： ） (4)Makers list (Drawing No. ) （ 4）厂商表（图号： ） Attached hereto and signed by each of the parties to the Contract (hereinafter collectively called the Specifications), making a