继电保护及故障信息系统的分析-电气工程专业论文.docxVIP

山东大学硕士学位论文 ABSTRACT The dispatching automation system of power system and its relevant technologies have been developed greatly in the past years. Unprecedented development has been achieved in operation monitoring ， administration and analysis of primary power network system. As the intelligent terminal equipment to realizing the automation system of electric network ，relay protection ，security automation device and fault recording device have a high informational and intellectual level. However ，to the dispatching operation adminis壮ation，the dispatching operation administration automation requires a better capabili句r of secondary equipments management ，operation state monitoring ，setting of relay operation value，and the utilization of the records of power network abnormity and fau1t information of secondary equipments. τhis thesis presents a design proposal of relay protection and 岛ult information management syste血 according to IEC 61970，IEC 61850，the relevant intemational standards，basing on the advanced distributed system technology. This system is constructed on the software development platform that bases on the object-oriented ，modulization and distributed system structure. Hence the system has good attributes including maintain 抽出守， expandability ，and openness. Modeling and analysis of the primary system and secondary system of the relaying protection 组d fault information system are discussed separately in this thesis. In order to meet the development requirements of the engineering construction and advanced application ，the model of primary system takes the CIM model in the IEC61970 (including component model and topology model) as reference and expands CIM according to the systems practical application. Also does the secondary system model 11 山东大学原士学位论文 山东大学原士学位论文 take the IEC61850s model structure as reference and bring expansion to the model according to the practical situation of the domestic secondary equipment. Then a system