计及载荷的风力发电机组变桨距控制策略研究-电力电子与电力传动专业论文.docxVIP

II II Abstract With the constant renewal and development of wind power technology, wind turbine gradually to the development of large-scale, lightweight direction. How to get the desired power quality and reduce the wind turbine loads effectively, which is one of the hot spots of todays wind turbine control technology research. The development of large-scale, lightweight of wind turbine increases the flexibility of parts and reduces the natural frequency values of wind turbine, which makes wind turbine systems at the low damping and easier to stimulate the resonance phenomenon, which bring great harm to safety and stability to the operation of wind turbine. Meanwhile, wind turbine bears static loads and dynamic loads during operation, such as the aerodynamic loads, gravity loads, and gyroscopic inertial loads, which make the wind turbine units suffered more complex loads, wind turbine in the pitch process , due to the increase of the weight of the wind wheel，resulting in rotating inertia increase , when the pitch action occurs , the pitch control system will give wind turbine a lot of mechanical stress , these mechanical stress brought great damage to the wind turbine , a serious impact on the life cycle of the wind turbine. Therefore, the control and optimization of wind turbine loads is one of the hot spots of todays wind turbine control technology research. MW-scale wind turbine is researched in the paper, to reduce the loads of wind turbine as the goal, in-depth study on wind turbine pitch control strategy, and proposed a co-ordination variable pitch control methods based on the characteristics of the wind turbine itself without increase wind turbine cost. In order to verify the correctness and feasibility of control strategy, various operating conditions of wind turbine is simulated in this paper, wind turbine loads distribution under various working conditions is analyzed and the effectiveness and feasibility of the control strategy is verified through establi