铝合金板剪力墙力学性能分析-结构工程专业毕业论文.docxVIP

西安建筑科技大学硕士学位论文 西安建筑科技大学硕士学位论文 西安建筑科技大学硕士学位论文 西安建筑科技大学硕士学位论文 Study on Mechanical Properties of Aluminum Alloy Plate Shear Wall* Specialty: Structural Engineering Author: Zhang Qingyun Advisor: Prof. Hao Jiping ABSTRACT In the traditional steel plate shear wall system, the plain carbon steel is selected for the infill panel. In this paper, aluminum alloy plate shear wall put forward, whose infill panel is replaced by aluminum alloy, with a low yield point and low elastic modulus. At present, few studies of the aluminum alloy plate shear wall are found at home and abroad. With the finite element numerical analysis method, this paper performed a series of analysis, which contained the elastic buckling analyses and the hysteretic performance analysis under cyclic load. Meanwhile, this paper took the synergistic effect of the aluminum alloy plate and the frame into account. The main research contents and results are listed as follows: Aluminum alloy plate shear wall ideal model was founded with BEAM188 and SHELL181 elements, whose beam-column joints and column foot are ideal hinged, in order to ignore the impact of the steel frame lateral stiffness. Elastic buckling analysis had been carried out to study the effects of different parameters on the elastic buckling stress of aluminum alloy plate shear wall. The results show that height to thickness ratio of panel λ, stiffness ratio of stiffener to panel η and column stiffness β have a great effect on the elastic buckling stress of aluminum alloy plate shear wall. Through the analysis of the aluminum plate shear wall, the critical stiffness requirement’s calculation formula of surrounding column of the aluminum plate shear wall was obtained. Post-buckling analysis had been carried out to study the effect of aluminum alloy plate’s tension field on the frame column. The results show that the aluminum alloy plate have low effect on the surrounding framework. Hysteretic performance analysis had been carried out to study the effe