空调箱数字化设计与模型分析-制冷及低温工程专业毕业论文.docx

上海交通大学硕士学位论文摘要 上海交通大学硕士学位论文 摘要 VI VI 其中，分排集总参数模型误差最小，各出口参数平均误差不超过 7%。 第三，空调箱其他部件模型建立与选型原则确定。空调箱还有其他 多种功能模块可供选择。针对喷水室与混合段，建立数学模型完成设计 过程。对于过滤器、消声段、风机段等，给出选型依据。 第四，空调箱箱体结露情况模型分析。箱体作为重要的隔热部分， 结露问题一直受到关注。建立箱体内、外壁面温度模型，以此快速与空 气露点温度比较判断是否有结露的可能。同时，对影响结露的四个主要 方面：箱体壁厚、材料导热系数、内部空气流速、内外空气温差进行了 充分的论证，提出不结露的设计原则。 第五，开发空调箱数字化设计软件。以各部件数字化模型为底层计 算依据，开发界面友好、计算速度快、便于操作的软件系统。 关键词：空调箱，翅片管换热器，箱体，建模，仿真 VII VII Digital Design and Modeling Analysis of Air Handling Unit ABSTRACT Because of different demands of buildings, a type of air handling unit could not meet all the requirements of users. If so, the design must be unreasonable economically. Recently, more and more companies try to develop the combined air handling unit which can be defined by different of models. Use reasonable models to deal with air by the requirement of buildings. However, air handling unit conclude many parts for variety of process, if you intend to calculate manually or experimentally, it must be unimaginable. Therefore, develop digital platforms to design and analysis models. My attention is paid on following aspects. Firstly, three differents models to calculate air heat exchange are analyzed. Research influence factors, structure character and linearity feature. Meanwhile, develop experiment to compare errors between three models. The results prove that Lin.G.G model couldn’t be used to calculate huge air fin-tube heat exchanger. And J model’s error is the smallest. Secondly, the mathematical models of fin-tube.heat exchanger are established both on design and simulation. On the basis, appropriate and effective algorithms are devised to solve the models in order to design the structural parameters of heat exchanger. Furthermore, three reasonable models is analyzed to simulate the performance, such as Lumped parameter model, distributed parameter models and sub-row lumped parameter model. Design experiment to validate the errors of different models. Both on the accuracy and trends, three models match the exper