调节器压板冲压工艺分析及模具设计.docVIP

调节器压板冲压工艺分析与模具设计 摘 要：本文简要概述了冲压模具的作用、地位、现状及发展方向。设计中对本产品加 工方案详细地进行了工艺分析和选择。经过分析各个方案的优缺点，我优先采用落料、 冲孔连续模，弯曲模来完成零件的生产要求。设计过程中进行了冲裁力的计算，并合适 地选择了压力机型号。在计算和查阅相关资料的基础上，按照技术规格，设计了两套模 具上的主要零部件，女n：凸模、凹模、凸模固顶板、垫板等，并给出了各个零件的零件 图样式及相关尺寸。模架、导柱、导套等均采用国家标准形式。在设计说明书最后，我 给岀了主要零部件的工程图及两套模具的装配图，从而更有利于实际生产需求。基于以 上的设计计算，做出一套符合任务要求的模具，同时也满足际生产要求，进行调节器压 板的大批量生产。 关键词：冲孔落料 连续模 弯曲模 Platen of the regulator stamping process and die design Abstract： This paper briefly summarizes the function , status , present situation and development direction of the die . In the design, the process analysis and selection of the product processing scheme arc carried out in detail. Through the analysis of the advantages and disadvantages of each programme, I give priority to the blanking, punching continuous mold, bending die to complete the production requirements of the parts.The calculation of blanking force is carried out in the design process, and the model of the press is chosen appropriately.In calculation and inspection on the basis of relevant information, in accordance with the technical specifications design two sets of moulds the main parts, such as punch and female die and punch fix board and so on, and gives the various parts of the part drawing style and size. Mould base, guide pillar, guide sleeve adopts the form of national standard.In the design of the final, I give the main parts of the engineering drawings and two sets of mold assembly plan, which is more conducive to the actual production needs.Based on the design and calculation, a set of molds in accordance with the requirements of the task is made, and the production requirements of the machine are also met, and the mass production of the regulator plate is carried out. Keywords: Punching blanking Progressive die Bending die ; 目录 TOC \o 1-5 \h \z 绪论 1 1?1课题背景及研究意义 1 1.1.1冲压模具加工的作用与地位 1 1.1.2冷冲模具工业的现状 2 1.2冷冲模具的未来的发展方向 3 1.3本次设计的主要内容 4 \o Current Document \h 调节器压板工艺性分析 4 \o Current Document \h 工艺方案的确定 6 \o Current Document \h 工艺设计计算