六相输电系统的故障暂态分析-电力系统及其自动化专业论文.docxVIP

ABSTRACT Six-phase transmission belongs to multiphase transmission. .It has much advantage, such as increasing the transmission power density, reduced the cost of tower construction, saving the space of line corridor, with more favorable environmental indicators, etc. The study of six-phase transmission is sufficient attention in other countries. In our country, the cost of line corridor of UHV transmission has becoming more and more expensive, at the same time the line corridors are also limited by geographical constraints and traffic, other industries constraints and environmental protection requirements. So six-phase transmission is an idea way for our country’s UHV transmission in theory. Compared to conventional three-phase systems or double lines on the same tower, the arrangement of six-phase transmission systems’ lines is more compact. The distributed parameters of line are differences between three-phase systems and six-phase systems. So, the transient characteristics of six-phase systems are different from the traditional three-phase transmission system. Since the operating time of relays on UHV transmission lines is very short, transient process have higher impact on six-phase systems’ relays, but the fault transient analysis of six-phase transmission is still blank. Six-phase transmission system transient characteristics analysis has great significance for systems’ stable operation and six-phase systems’ protection’ studying. The research status of six-phase transmission system fault analysis mainly focus on the steady-state analysis, this paper give deep analysis on fault transient. Using decoupling transformation matrix can transform the faulted Six-phase Power Transmission System into six sequence components. Then this paper prove that the analysis of six-phase transmission systems’ fault transient based on six-phase component method is correct. Combined with the π-type equivalents circuit, the six-sequence transient model was e