塑料接头成型技术及注射模具设计.docxVIP

塑料接头成型技术及注射模具设计 摘要：木设计基于CAD技术对塑料管接头进行了设计。通过观察CAD塑件图对其结 构进行了分析，并确定合理的设计方案。同时对塑件进行PROE的建模，清晰地观察 塑件外形，选择对其影响最小的浇口的位置。设计中选用潜伏浇口的单分型面结构 采用一模两腔，提高其生产效率，降低其生产成本。模具的抽芯机构采用斜导柱侧抽 芯机构，最后选用推管推出。对于模具成型零件，首先计算型芯和型腔的尺寸，叙述 各个机构的设计过程，记录设计的内容。在设计方案上的确定上，首先考虑塑件的质 量和模具的结构合理性，再从模具的成木、加工难易、结构简单出发，选取了合适的 方案。 通过木次设计，对注射模有了更深一步的了解，同时也认识到了设计过程中的一 些细节和难点，明白了模具的一些基木工作原理和结构。经过CAD制图建立各类的 块和零件库，极大地提高了工作效率。 关键词：成型技术，注射模，CAD,塑料管接头 Forming Technology for Plastic Pipe Joint and The Design ofInjection Mold Abstract： The design of plastic pipe fitting is achieved based on CAD technology. By observing CAD plastic parts drawing, its structure is analyzed and reasonable design scheme is determined.Meanwhile, carrying out PROE modeling of plastic parts, clearly observing the shape of plastic parts, and choosing a gate location with minimal impact on it.This design employs single parting surface structure of submarine gate and adopts two?cavity mold, thus improving its production efficiency and reducing its production costs- Core pulling structure of the mold adopts side core-drawing mechanism of bevel pillar and at last uses push tube to launch.For molding parts, it is firstly to calculate the sizes of core and cavity,describe design process of each mechanism and record design contents- In determining the design scheme, the quality of plastic parts and the reasonableness of mold structure should be the top priority.Then, starting from the cost of the mold, difficulty of processing and simple structure, it is possible to select an appropriate scheme . This design enables me to have a deeper understanding of injection molding, and I also recognize some details and difficulty in the design process and master some basic working principles and structures of the mold at the same time. The establishment of all kinds of blocks and parts stores through CAD drawing has greatly improved work efficiency. Keywords: Forming Technology, Injection Mold, CAD, Plastic Pipe Joint 目录 1绪论 ??????? 1 2塑件的工艺性分析 ??????? 3 2.1塑件的