孔板波纹填料的结构参数对其性能的影响.docxVIP

孔板波纹填料的结构参数对其性能的影响贾绍义 孙永利 赵金铎 吴松海 邢义(天津大学化工学院 , 天津 30 孔板波纹填料的结构参数对其性能的影响 贾绍义 孙永利 赵金铎 吴松海 邢义 (天津大学化工学院 , 天津 300072) 摘 要 在内径 Φ300 mm 的填料塔中研究了孔板波纹填料的结构参数对液相轴向混合特性 、流体力学和传质性 能的影响 . 研究结果表明 , 轴向返混参数随开孔率 、倾角的增加及盘高的减小而增加 , 填料层压降随开孔率 、 盘高的增加及倾角的减小而降低 , 传质单元高度随倾角的增加 、盘高的减小而降低 , 开孔率对传质单元高度的 影响有一个适宜值 . 通过对实验数据的回归分析得出了轴向返混参数 、填料层压降及传质单元高度的关联式 . 该 研究结果对孔板波纹填料的开发与设计具有参考价值. 关键词 孔板波纹填料 填料塔 轴向返混参数 流体力学 传质性能 中图分类号 TQ 028 . 1 文献标识码 文章编号 0438 - 1157 (2002) 04 - 0364 - 05 A I NFL UENCE OF STRUCTURAL PA RAM ETERS OF CO RRUGATED PL ATE PAC KI NG O N ITS PERFO RMA NCES J IA Shaoyi , S UN Yongl i , ZHAO Jinduo , WU Songha i and XING Yikun ( S chool of Chem ical En gi neeri n g , T i anji n U ni versi t y , T i anji n 300072 , Chi n a) Abstract The influence of st ruct ural parameters of co rrugated plate packing o n it s perfo r mance of axial mixi ng in liquid p hase and hydro dynamic and mass t ransfer was investigated in a Φ300 mm ID packing tower . The result s show n t hat t he axial backmixing parameter Pe increases wit h increasing opening ratio and t he inclinatio n angle β and wit h decreasing t he unit height of t he packing H and t hat t he p ressure drop of packing layer Δ p/ Z decreased wit h increasing opening ratio and unit height of t he packing H and wit h decreasing inclinatio n angle β and t hat t he height of mass t ransfer unit HO G decreased wit h increasing inclinatio n angle β and wit h decreasing unit height of t he packing H , and t hat influence of opening ratio o n t he height of mass t ransfer unit HO G had a suitable value . Thro ugh regressing experimental data , t he co rrelative exp ressio ns of t he axial backmixing parameter Pe and t he p ressure drop of packing layer Δ p/ Z and t he height of mass t ransfer unit HO G were o btained. The result s co uld be of value to develop ment and design of co rrugated plate packing. Key words co rrugated plate packing , packi ng tow