d3879-91-中文版-角闪石石棉取样的标准试验方法.docVIP

D 3879 PAGE 1051 Designation: D 3879 -91 (Reapproved 1995) 编号：D 3879-91（1995年重新批准） PAGE 1050 Standard Test Method for Sampling Amphibole Asbestos This test method is under the jurisdiction of ASTM Committee C-17 on Fiber-Cement Products and is the direct responsibility of Subcommittee C17.03 on Asbestos-Cement Sheet Products and Accessories.本规范由ASTM This test method is under the jurisdiction of ASTM Committee C-17 on Fiber-Cement Products and is the direct responsibility of Subcommittee C17.03 on Asbestos-Cement Sheet Products and Accessories.本规范由ASTM委员会C-17纤维水泥制品委员会管辖，并由C17.03石棉水泥板制品及配件分委会直接负责。 Current edition approved Oct. 15, 1991. Published December 1991. Originally published as D 3879 - 80. Last previous edition D 3879 - 90.现行版本于1991年10月15日批准，并于1991年12月出版。最初版本编号为D 3879 This standard is issued under the fixed designation D 3879; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号D 3879刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope 适用范围 1.1 This test method describes the procedure for taking a composite sample or a master composite sample (at the mine, at the factory, or from a consignment) from a lot of commercial milled amphibole fibers, conditioning the sample, and reducing it in quantity so as to provide a series of relatively small test specimens of loose asbestos fiber, each of which may be regarded as representative of the lot. (See Appendix X1 for sampling strategy.)本试验方法描述（在矿场、工厂或从委托货物中）从一个批次的工业用粉碎角闪石石棉纤维中提取一个混合样品或总混合样品的程序。调节此样品并缩减其数量，以提供一些相对较小的疏松石棉纤维试样，每一个试样都可视作该批次的代表。（有关取样策略，请见附录X1。） 1.2 This test method is suitable for taking test specimens of amphibole asbestos for the following test methods: C 1119, C 1120, C 1121, C 1122, C 1123, C 1124, C