和关于Windows模式中高速存储技术的研究外文文献翻译、中英文翻译.docVIP

PAGE 附录Ⅱ 外文翻译部分 原文： Research of High-speed Data Storage Technique in Windows Mode Abstract: In the application of modern industry measure and control fields,the transient state single should be incepted to computer for storage and processing real time. With increasing design target,it becomes more and more important to the problems in the data storage processing and the ways to solve these problems in the data storage processing and the ways to solve these problems in Windows mode. Keywords: Data storage; transfers speed; WinDriver; ASPI; virtual disk. 1 Foreword With the measure instrument precision and practice demand target increasing, the data transfer speed between instrument and computer improves, and most of the data should be processing real time. Common CPU operation speed has already exceeded 1 GHz, so it is easy for the operation ability of computer to satisfy the command of industry measure and control. However, the key point is the transfer bottleneck between the instrument and host computer. If the data cannot be sent to computer in time, the computer’s operation ability will not be exerted effectively. This problem will be discussed as follow. The first item should be ensured is the kind of the OS(operation system). The most popular OS is Windows system, so the most important tache of data transfer will be discussed in Windows mode. 2Memory Management One of the key concepts of memory managements is the correlation between the address space (logic address) and storage and storage space (physical address). When program is running, memory management unit (MMU) executes the mapping from logic address to physical address. The logic address is added by the value in relocation register before sent to memory, and the value in relocation register is transparent to user. It is obvious that in Windows mode, memory management is used the virtual address space, but not physical address, so the program will receive the virtual address, instead of phy