机床CNC系统的智能数控程序处理器外文文献翻译、中英文翻译.docVIP

An intelligent NC program processor for CNC system of machine tool Yadong Liua,_, Xingui Guoa, Wei Lia, Kazuo Yamazakia, Keizo Kashiharab, Makoto Fujishimab Abstract NC program interpreting is one of the most important tasks of CNC in machine tool system. The existing CNC systems only support vendor-specific NC program input, which restrict the applying of other similar functional NC programs with different program format. Especially for those users owning several machine tools with different CNC from the same provider, the diversity of NC programs dramatically increases their cost and time on operator training and machine tool maintenance. In order to deal with the variety of NC program, an intelligent NC program processor (NCPP) is proposed in this paper. 1. Introduction In the CNC system of modern machine tool, NCprogram interpreting is very important, which is in charge of the accurate resolving of machining intention generated from CAM system. The major function of NCPP is to decode the input into motion command and programmable logic controller (PLC) command, and send them to the motion control processor (MCP) and PLC of CNC separately in order to control the movement of the cutting tool and auxiliary machine logic. Most CNC systems can handle only one specific NC program format, while the diversity of NC programs always entangles the machine tool users,especially for those owning several machine tools with different CNC but from the same provider. 2. Interface of NC program processor NCPP is one module of the CNC, which requires cooperation between different modules; therefore it’s quite necessary to clarify the interface before starting design. The purpose of NCPP is to translate the input NC program into machine instruction, such as motion command, PLC command or simple parameter settings and error messages. NIST calls these outputs as Canonical Machining Functions. The canonical machining functions were devised with two objectives in