台灯底座注塑模具设计及型面仿真加工说明书.docVIP

PAGE PAGE 9 PAGE PAGE 2 台灯底座注塑模具设计与型面仿真加INJECTION MOLD DESIGN AND PROFILE SIMULATION MACJINING OF TABLE LAMP BASE工 摘要 随着经济的发展和科学技术的不断提高，塑料制品的质量、精度以及复杂性越来越高。注塑成型是塑料工业中一种重要的成型方法,注塑模具是型腔零件生产的关键工艺装备，它直接影响制品的质量、生产率和成本以及新产品的开发，对于企业在市场中的竞争力有着决定性作用。因此，研究注塑模具的设计制造具有非常重要的现实意义。 提高模具的设计水平并结合现代化的制造技术，才能够充分发挥模具的功能和作用。CAD/CAE/CAM技术作为一种现代设计制造方法，把它引入注塑模具的生产实际中，可以大大缩短产品开发周期，提高生产效率和市场竞争力。 关键词 台灯底座；模具设计；型面仿真 Abstract With the development of economy and the continuous improvement of science and technology, the quality, accuracy and complexity of plastic products are getting higher and higher. Injection molding is an important molding method in the plastic industry. The injection mold is the key technology equipment for the production of the cavity parts. It directly affects the quality, productivity and cost of products and the development of new products. It plays a decisive role in the competitiveness of the enterprises in the market. Therefore, studying the design and manufacture of injection mold is of great practical significance. To improve the design level of mould and combine modern manufacturing technology, we can give full play to the function and function of mould. As a modern design and manufacturing method, CAD/CAE/CAM technology is introduced into the production practice of injection mold, which can greatly shorten the period of product development, improve production efficiency and market competitiveness. Key word Table lamp base mould design Surface simulation PAGE PAGE 9 PAGE PAGE 3 目录 摘要 I Abstract II TOC \o 1-3 \h \z \u 绪论 1 1.成型工艺规程的编制 3 1.1件的工塑艺性分析 3 1.1.1塑件的原材料分析 3 1.1.2塑件的结构和尺寸精度及表面质量分析 4 1.2计算塑件的体积和质量 4 1.3塑件注塑工艺参数的确定 5 1.4塑料成型设备的选取 5 2.注塑模的结构设计 6 2.1分型面选择 6 2.2确定型腔的数目及排列方式 6 2.2.1模腔数量的确定 6 2.2.2型腔的排列方式 8 2.3浇注系统设计 9 2.3.1主流道设计 9 2.3.2分流道设计 10 2.3.3浇口设计 12 2.3.4排气结构的设计 12 2.3.5主流道衬套的选取 12 2.4推出机构设计 13 3.台灯底座注塑模具的有关计算 15 4.模具加热和冷却系统的设计 16 5.模具闭合高度确定 18 5.1计算模具的闭合高度 18 5.2校核注塑机